Dynocel 643 is used to dehydrate vapor phase and liquid phase olefinic hydrocarbons. Dynocel 643 does not require a preload step.
Typical Applications
Treatment of vapor or liquid phase hydrocarbons.
Benefits at a glance
Dynocel 643 does not require a preload step prior to use in olefinic hydrocarbon streams.
Product Details & Documents
Product Information
Further Information
Storage:
The material is stored in its original containers/packaging in a dry, covered location protected
from the ambient environment
• The material is protected from direct exposure to sunlight and rain (prolonged exposure to
direct sunlight may degrade the packaging)
• The material is not subjected to temperatures exceeding 450°F/230°C while in storage
• The material is stored elevated off the ground to ensure that there is no exposure to liquid
water
• Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to
remove excessive free moisture
• Desiccant products intended for regenerative service will require a complete thermal
regeneration cycle (in TSA service) or several pressure swing cycles (in PSA service) before full
activity is restored
from the ambient environment
• The material is protected from direct exposure to sunlight and rain (prolonged exposure to
direct sunlight may degrade the packaging)
• The material is not subjected to temperatures exceeding 450°F/230°C while in storage
• The material is stored elevated off the ground to ensure that there is no exposure to liquid
water
• Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to
remove excessive free moisture
• Desiccant products intended for regenerative service will require a complete thermal
regeneration cycle (in TSA service) or several pressure swing cycles (in PSA service) before full
activity is restored
Packaging:
- 150 kg steel drums available
- 1000 kg (2205-lb) supersacks
- Alternative packaging available.
Shelf life:
5 years in original packaging stored in a dry, covered location