Granular adsorbent for the removal of process impurities from aqueous or hydrocarbon streams. Especially effective in color body and odor removal from lubrication oil and wax process streams. Treating lubrication oils and waxes with Purocel RI will reduce organic acidity, increase resistance to oxidation and remove tastes and colors.
Tags
Typical Applications
- Used motor oil polishing/purification
- Used transformer oil polishing/purification
- White oil polishing
Benefits at a glance
Optimized particle size distribution (PSD Opt) based on extensive commercial trials and 75 years of experience in the activated bauxite applications, Polish the used oil to meet group I / II base oil quality, Regenerable media to last for few hundred cycles, High surface area for better loading capacity, Minimal disposal liability once exhausted as it is regenerated before unloading and hence non-hazardous in nature.
Product Details & Documents
Further Information
Storage:
The material is stored in its original containers/packaging in a dry, covered location protected
from the ambient environment
• The material is protected from direct exposure to sunlight and rain (prolonged exposure to
direct sunlight may degrade the packaging)
• The material is not subjected to temperatures exceeding 450°F/230°C while in storage
• The material is stored elevated off the ground to ensure that there is no exposure to liquid
water
• Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to
remove excessive free moisture
• Desiccant products intended for regenerative service will require a complete thermal
regeneration cycle (in TSA service) or several pressure swing cycles (in PSA service) before full
activity is restored
from the ambient environment
• The material is protected from direct exposure to sunlight and rain (prolonged exposure to
direct sunlight may degrade the packaging)
• The material is not subjected to temperatures exceeding 450°F/230°C while in storage
• The material is stored elevated off the ground to ensure that there is no exposure to liquid
water
• Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to
remove excessive free moisture
• Desiccant products intended for regenerative service will require a complete thermal
regeneration cycle (in TSA service) or several pressure swing cycles (in PSA service) before full
activity is restored
Packaging:
50 lbs (22.7 kg) sacks,
2,000 lbs (907.2 kg) supersacks
or 1 MT supersacks
steel drums available, bulk shipments
2,000 lbs (907.2 kg) supersacks
or 1 MT supersacks
steel drums available, bulk shipments
Shelf life:
5 years in original packaging stored in a dry, covered location