EcoMax TG is a Claus tail gas catalyst sourced from spent CoMo hydroprocessing catalyst. Clean, large-diameter CoMo catalyst from certain hydroprocessing applications is treated at Evonik's catalyst processing facilities to remove contaminants and restore activity. The catalyst is then qualified for Claus tail gas treating with an application performance test in Evonik's pilot-scale tail gas testing unit, as well as a pressure drop test. EcoMax TG catalyst delivers very high CS2 conversion compared to traditional tail gas catalysts, with 70% less carbon footprint.
Typical Applications
- Claus tail gas treating (e.g. SCOT, BSR, TGTU)
Benefits at a glance
EcoMax TG is a Claus tail gas catalyst sourced from spent CoMo hydroprocessing catalyst. Clean, large-diameter CoMo catalyst from certain hydroprocessing applications is treated at Evonik's catalyst processing facilities to remove contaminants and restore activity. The catalyst is then qualified for Claus tail gas treating with an application performance test in Evonik's pilot-scale tail gas testing unit, as well as a pressure drop test. EcoMax TG catalyst delivers very high CS2 conversion compared to traditional tail gas catalysts, with 70% less carbon footprint.
Product Details & Documents
Further Information
Storage:
The material is stored in its original containers/packaging in a dry, covered location protected
from the ambient environment
• The material is protected from direct exposure to sunlight and rain (prolonged exposure to
direct sunlight may degrade the packaging)
• The material is not subjected to temperatures exceeding 450°F/230°C while in storage
• The material is stored elevated off the ground to ensure that there is no exposure to liquid
water
• Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to
remove excessive free moisture
• Desiccant products intended for regenerative service will require a complete thermal
regeneration cycle (in TSA service) or several pressure swing cycles (in PSA service) before full
activity is restored
from the ambient environment
• The material is protected from direct exposure to sunlight and rain (prolonged exposure to
direct sunlight may degrade the packaging)
• The material is not subjected to temperatures exceeding 450°F/230°C while in storage
• The material is stored elevated off the ground to ensure that there is no exposure to liquid
water
• Once the material is loaded into the vessel, a thorough nitrogen purge is recommended to
remove excessive free moisture
• Desiccant products intended for regenerative service will require a complete thermal
regeneration cycle (in TSA service) or several pressure swing cycles (in PSA service) before full
activity is restored
Packaging:
2,000 lbs (907.2 kg) supersacks
steel drums available
steel drums available
Shelf life:
5 years in original packaging stored in a dry, covered location