ORTEGOL® 502

ORTEGOL® 502 is a degassing compound for manufacturing rigid polyurethane foam. It is a dispersion of silica in polydiethyl siloxane which is soluble in a wide range of polyols and causes no phase separation issues.

Typical Applications

ORTEGOL® 502 is a very potent cell opener for rigid polyurethane foams, e.g. all water-blown low-density spray foam which requires a certain amount of open cells in order to prevent the foam from shrinkage. In case of these foam applications, ORTEGOL® 502 has to be used in combination with a cell stabilizer.
ORTEGOL® 502 can also be used as a defoamer in high density polyurethane applications. In this case, partial or complete cell collapse might be desired and can be achieved by addition of higher levels of ORTEGOL® 502.
The suggested use level of ORTEGOL® 502 should be around 0.1 to 2.0 parts per 100.0 parts polyol (pphp), however, the optimal use level depends on the individual PU formulation and has to be determined experimentally.
ORTEGOL® 502 is insoluble in polyol systems which are in common use for the production of rigid polyurethanes. This incompatibility is essential for its cell-opening and defoaming effect, but will result in a turbid polyol blend which might undergo separation over time. Polyurethane systems containing ORTEGOL® 502 should be carefully homogenized prior use.

Benefits at a glance

  • High compatibility with a variety of polyols
  • Easy do incorporate in polyol blends

Markets & Applications