Watch the Webinar Recordings
Access our extensive library of recorded webinars, where you can find all past sessions available for viewing at your convenience. This resource allows you to revisit topics of interest or catch up on any sessions you may have missed. Enhance your understanding and stay informed with valuable insights from our expert presentations.
This product effectively addresses the challenges posed by elevated temperatures, offering extended pot life that allows for flexible application and excellent carbamation resistance, ensuring durability in high humidity environments. With its low viscosity, Ancamine® 2858 guarantees superior wetting performance and easy handling, while its rapid hardening capabilities significantly enhance workflow efficiency for a smoother application process.
If you’re formulating coatings in the Middle East or for application during a Southern European summer and missed our recent webinar, it’s now available on demand.
Please register for the Evonik Coatino Campus to access this session, our future webinars, and a wealth of additional resources to support your coating projects.
The tightening of environmental regulations has heightened the demand for marine and protective coatings that reduce volatile organic compounds (VOCs), such as solvents and plasticizers. These coatings must also maintain low mixing viscosity, facilitate rapid drying times, and offer extended pot life, all without compromising performance. Our latest amine curing agents set new benchmarks for environmental compliance while delivering exceptional anti-corrosion and mechanical properties, even in the most demanding conditions. Watch our webinar recording (presented in Chinese) to navigate these rigorous challenges.
Our webinar (presented in Chinese) introduces our latest epoxy curing agent tailored for low VOC waterborne protective coatings. Anquamine® 75 offers exceptional early water resistance, versatile application capabilities and great cost-in-use, perfectly complementing various waterborne epoxy systems to meet diverse anti-corrosion needs.
Watch the webinar recording to discover the unique advantages of our new product and gain insights into Evonik's formulation strategies for waterborne epoxy coatings.
As environmental and performance standards have become more stringent, reducing VOC emissions from epoxy protective coatings has become essential. This webinar covered the use of a novel ULE amine curing agent developed by the Evonik team. This agent enables the design of ultra-low emission epoxy paints without compromising the handling or performance properties of traditional solvent-based systems. Here is the recording of the webinar.
Learn everything about Ancamide® 2853 & 2865, the newly developed epoxy curing agents, that provide a unique combination of flexibility, toughness and fast-curing properties.
- Superior hardness (> 70 Shore D)
- High elongation (> 90%)
- Excellent tear resistance
- Enhanced EHS profile
In this webinar, we presented the latest results on organic emissions of epoxy systems cured by Evonik’s amine hardeners. Waterborne and low emission hardeners were shown to comply with the most important eco labels for the construction industry such as Emicode or AgBB, making them an ideal choice for indoor flooring applications. You can now watch the recording of the webinar to learn more about these innovative solutions.
Discover the future of eco-friendly protective coatings in our next webinar with Katharina Karns who guided you through the benefits of our using Anquamine® 401 and Anquamine® 419 curing agents. Learn about waterborne hardeners that are not only eco-friendly but also pave the way for sustainable practices in protective coatings and be part of the movement towards a greener future in the coatings industry.
The first in our new webinar series looks at high-performance composite manufacturing processes. Focusing on liquid composite molding (LCM) processes, including VARI, RTM, and WCM Sebastian explores how epoxy systems, especially curing agents, are vital for optimal performance in aerospace, automotive, and wind energy composites.
This second webinar in our series on high-performance composites focussed on continuous composite manufacturing and covers Filament Winding and Pultrusion, plus a combination of both for infrastructure, marine, and transport applications. We discussed the pros and cons of these processes and recommended Evonik products that can help you improve composite performance.
This webinar in our high-performance composites manufacturing series focused on Sheet Molding Compounding (SMC) and Prepreg Technologies. We discussed their benefits and challenges, and presented Evonik's product solutions for superior composite performance tailored to automotive, aerospace, and sports industries.
Our coatings expert Katharina Karns shares the latest innovation in multifunctional mannich bases - ANCAMINE® 2836 curing agent.
Discover the advantages of using this eco-friendly aliphatic amine building block and its compatibility with other technologies as a co-curative. Learn about its improved productivity, excellent balance of pot life and cure speed, and enhanced performance with high crosslinking density and chemical and corrosion resistance.
Moisture in concrete can arise from various sources, including trapped moisture, saturated sub-base soil, groundwater, and poor drainage. It migrates through concrete slabs due to capillary pressure and temperature gradients, potentially causing floor failures like blistering, delamination, and dampness, leading to significant repair costs.
To prevent adhesive failure, it's essential to minimize moisture vapor transmission, which can be achieved with a resin-rich barrier coating. Two-component epoxy coatings are favored for their strong adhesion and low moisture vapor transmission but often require plasticizers for optimal performance.
Evonik has developed new amine curing agent technology that reduces or eliminates the need for plasticizers, resulting in lower emissions while maintaining high curing performance. This webinar will showcase the benefits of this technology, including rapid property development and customizable curing rates, enabling the creation of ultra-thin coatings with effective moisture vapor barrier properties.
Epoxy-based paints are established for metal protection in marine and protective applications, but the industry faces challenges in meeting emerging VOC regulations by reducing solvents and plasticizers. High solid formulations struggle to balance pot-life, dry time, viscosity, and flexibility, and plasticizers can leach out, diminishing flexibility over time.
To address these issues, Evonik has developed new amine curing agent technology that enables the formulation of ultra-low emission epoxy paints without sacrificing handling or performance. These innovative curing agents have low viscosity and quick build-up properties at ambient and low temperatures, requiring little to no plasticizer for full cure, thus maintaining performance over time. They also provide excellent barrier properties, flexibility, and adhesion to metal.
This webinar will showcase the handling and performance attributes of this novel amine curing agent technology for developing sustainable, high-performance ultra-low emission epoxy paints.
With our brand-new VESTA eCO grades we’ve swapped virgin fossil raw materials for renewable ones to make your solvent, composite and coating systems much more sustainable.
As the pioneer in isophorone chemistry Evonik is currently the only company in the world offering a renewable I-Chain platform that includes isophorone, -diamine and -diisocyanate products.
During this webinar we’ll discuss our VESTA eCO product series and why there is no compromise in performance compared to virgin fossil-based grades. We will also explain what kind of renewable feedstocks we use and how the certified mass balance approach works so you can start passing these C02 emissions savings on to your customers.
Discover how we can help you to reach your sustainability goals.
Sustainability is a key driver for the chemical industry and central to Evonik's purpose, "Leading Beyond Chemistry," which aims to enhance sustainability, health, and comfort.
Evonik supports customers in developing high-performance structural adhesives while contributing to sustainability goals through its portfolio of epoxy curing agents made from renewable raw materials.
This webinar will highlight our strategies for improving sustainability in epoxy-based structural adhesives and outline Evonik’s overall sustainability strategy.
Maximizing productivity and enhancing performance are essential in concrete floor coatings, particularly when low emission requirements are met. Anquamine® 728, a waterborne curing agent, addresses these needs by offering a primer with a recoat time of less than four hours at 10 °C (50 °F), excellent adhesion to concrete, and high aesthetics. It allows for easy application, with coatings applicable up to 20 mils (500 g/m²) wet film thickness without compromising cure speed, even under high humidity up to 85%.
This webinar will showcase a range of waterborne epoxy floor systems, highlighting the advantages of Anquamine® 728 and its application in formulating a one-day floor system to minimize downtime and get businesses back in service quickly.
